Angles do not always come as 35.5°. Maps, surveys and many textbooks write them in degrees, minutes and seconds, like 35° 30′ 0″. The tool below is a practice generator: it creates a new problem every time, checks what you type and shows each carry or borrow step by step.
Practice generator: degrees, minutes and seconds
Pick a type and a level, type your answer and press Check. Show steps reveals every carry and borrow. Minutes and seconds run from 0 to 59, and decimal answers are exact, so do not round.
Level 1 uses friendly numbers, level 2 needs one carry, borrow or remainder, level 3 uses bigger angles and the full process.
Contents
- How degrees, minutes and seconds work
- Convert DMS to decimal degrees
- Convert decimal degrees to DMS
- Add and subtract angles in DMS
- Multiply and divide an angle by a whole number
- Common mistakes
- Solved exercises
- Frequently asked questions
- See also
How degrees, minutes and seconds work
A degree is split the way an hour is: 1° = 60′ (arcminutes) and 1′ = 60″ (arcseconds), so 1° = 3600″. Writing an angle this way is called DMS notation, short for degrees, minutes and seconds. These minutes and seconds measure angle, not time, even though they come from the same base 60 counting that ancient Babylonian astronomers used.
That is why 60 is the number that matters in every problem here. When seconds reach 60 they become 1 minute. When minutes reach 60 they become 1 degree. A few exact values make quick checks:
| Angle | Decimal degrees | Seconds |
|---|---|---|
| 6′ | 0.1° | 360″ |
| 15′ | 0.25° | 900″ |
| 30′ | 0.5° | 1800″ |
| 45′ | 0.75° | 2700″ |
| 36″ | 0.01° | 36″ |
| 18″ | 0.005° | 18″ |
| 9″ | 0.0025° | 9″ |
Convert DMS to decimal degrees
Divide the minutes by 60, divide the seconds by 3600 and add everything to the degrees.
$$D = d + \frac{m}{60} + \frac{s}{3600}$$
The generator only asks for decimals that end exactly (at most 4 places), so you never have to decide how to round. If your homework gives a repeating decimal, such as 0° 1′ = 0.01666…°, your teacher will say how many places to keep.
Example 1: DMS to decimal degrees
Convert 47° 24′ 18″ to decimal degrees.
- Turn the minutes and seconds into seconds (1′ = 60″): 24 × 60 + 18 = 1458.
- A degree has 3600 seconds (60 × 60), so 1458 ÷ 3600 = 0.405.
- Add the whole degrees: 47 + 0.405 = 47.405.
- Answer: 47.405°.
Convert decimal degrees to DMS
Keep the whole degrees. Multiply the decimal part by 60 to get minutes. Multiply what is left of the minute by 60 to get seconds.
Example 2: decimal degrees to DMS
Convert 63.2125° to degrees, minutes and seconds.
- Keep the whole degrees: 63°. The decimal part is 0.2125°.
- Multiply the decimal part by 60 to get minutes: 0.2125 × 60 = 12.75. The whole part, 12, is the number of minutes.
- Multiply what is left of the minute, 0.75′, by 60 to get seconds: 0.75 × 60 = 45″.
- Answer: 63° 12′ 45″.
Add and subtract angles in DMS
Line the angles up in columns: degrees under degrees, minutes under minutes, seconds under seconds. Start on the right, with the seconds. When you add, you carry: 60″ becomes 1′ and 60′ becomes 1°. When you subtract, you borrow, and what you borrow is worth 60, not 10: a borrowed minute is 60 seconds and a borrowed degree is 60 minutes. If there are 0 minutes to borrow from, borrow 1 degree first, turn it into 60′ and take 1 minute from those.
Example 3: adding angles
Add: 35° 48′ 50″ + 27° 25′ 40″
- Add column by column. Seconds: 50 + 40 = 90. Minutes: 48 + 25 = 73. Degrees: 35 + 27 = 62.
- 90 seconds is 60 or more, and 60″ = 1′. Keep 90 - 60 = 30″ and carry 1′: the minutes become 73 + 1 = 74.
- 74 minutes is 60 or more, and 60′ = 1°. Keep 74 - 60 = 14′ and carry 1°: the degrees become 62 + 1 = 63.
- Answer: 63° 14′ 30″.
Example 4: subtracting angles with borrowing
Subtract: 90° 10′ 15″ - 37° 48′ 25″
- Seconds: 15 is smaller than 25, so borrow 1 minute (1′ = 60″). The minutes go from 10 to 9, and 15 + 60 = 75. Then 75 - 25 = 50.
- Minutes: 9 is smaller than 48, so borrow 1 degree (1° = 60′). The degrees go from 90 to 89, and 9 + 60 = 69. Then 69 - 48 = 21.
- Degrees: 89 - 37 = 52.
- Answer: 52° 21′ 50″.
Multiply and divide an angle by a whole number
To multiply, multiply each part by the number and then carry from the seconds up to the degrees. To divide, start with the degrees: what is left over turns into minutes (times 60) and joins the minutes you already have. What is left over from the minutes turns into seconds. The generator only creates divisions that end in whole seconds.
Example 5: multiplying an angle
Multiply: 12° 35′ 40″ × 4
- Multiply each part by 4. Seconds: 40 × 4 = 160. Minutes: 35 × 4 = 140. Degrees: 12 × 4 = 48.
- 160 seconds is 60 or more. Since 160 = 2 × 60 + 40, that is 2′ and 40″. Add the minutes: 140 + 2 = 142.
- 142 minutes is 60 or more. Since 142 = 2 × 60 + 22, that is 2° and 22′. Add the degrees: 48 + 2 = 50.
- Answer: 50° 22′ 40″.
Example 6: dividing an angle
Divide: 83° 14′ 54″ ÷ 6
- Degrees: 83 ÷ 6 gives 13 with 5 left over, because 83 = 6 × 13 + 5.
- Turn the remainder into minutes (1° = 60′): 5 × 60 = 300. Add the minutes you already had: 300 + 14 = 314.
- Minutes: 314 ÷ 6 gives 52 with 2 left over, because 314 = 6 × 52 + 2.
- Turn the remainder into seconds (1′ = 60″): 2 × 60 = 120. Add the seconds you already had: 120 + 54 = 174.
- Seconds: 174 ÷ 6 = 29.
- Answer: 13° 52′ 29″.
Common mistakes
- Borrowing 10 or 100. A minute has 60 seconds, so you borrow 60.
- Leaving the answer unnormalized. 75′ is not a final answer: it is 1° 15′.
- Writing 35.30° for 35° 30′. 30′ is half a degree, so the angle is 35.5°.
- Dropping the remainder in a division. What is left over from the degrees is not lost, it becomes minutes.
- Rounding halfway through. Work in whole seconds or exact fractions and round only at the end.
- Mixing ′ and ″ with feet and inches. The same marks are used for feet and inches. In an angle problem they mean minutes and seconds.
Solved exercises
Try each one first, then open the answer.
1. Convert 62° 15′ 0″ to decimal degrees.
62.25°
2. Convert 18.35° to degrees, minutes and seconds.
18° 21′ 0″
3. Add: 125° 40′ 30″ + 48° 35′ 45″
174° 16′ 15″
4. Subtract: 90° 0′ 0″ - 29° 45′ 30″
60° 14′ 30″
5. Multiply: 23° 41′ 52″ × 3
71° 5′ 36″
6. Divide: 100° 30′ 0″ ÷ 4
25° 7′ 30″
Frequently asked questions
Why does a degree have 60 minutes and not 100?
It is a legacy of the Babylonians, who counted in base 60. Navigators and astronomers kept it because 60 divides evenly by 2, 3, 4, 5, 6, 10, 12, 15, 20 and 30, and it fits the 360° circle.
How do I type the symbols °, ′ and ″?
You do not need them in the generator: type only the numbers in each box. In your notebook, an apostrophe (') and a double quote (") are usually accepted when ′ and ″ are hard to type. The decimal box takes a point or a comma.
What happens if I type 35° 75′?
The generator tells you it is the same angle but not normalized. Minutes and seconds must end up between 0 and 59.